Search

CONTACT US

Tel:
+86(351)728-2419
+86(318)823-1807

Add:

20 Yuhua East Street, Zaoqiang County, Hengshui City, HeBei Prov. China 053100

Copyright Hebei Juntong Machinery Manufacturing Co.,LTD.     冀ICP备11023387号-1     Hebei Xinshan Conveyor Machinery Co., Ltd.

share share share share share

top
>
>
Conveyor Roller

Conveyor Roller

Transition Roller

Transition Roller pre-arranged between the terminal and the common trough roller in order to decrease the stress at the at the edge of belt. 为了减小皮带边缘的拉紧力,在末端和公共槽辊之间预先设置了过渡辊。
View details

Trough Roller

Trough rollers are the components used to support belt and material loaded on the belt conveyor. The standard trough angles are generally divided into 10°, 20 °, 30 °, 35 ° and 45 °. 槽型托辊组是用来支撑输送带及输送带上承载物料的部件,标准槽角一般分为10°、20°、30°、35°、45°.
View details

Impact Roller

Impact rollers are installed below the drop material section of the conveyor to reduce the impact of the falling material on the conveyor belt to prolong the service life of the conveyor belt. 缓冲托辊组安装在输送机受料段的下方,减小落料时物料对输送带的冲击,以延长输送带的使用寿命。
View details

Offset Roller

Offset roller is incorporates an offset center roller design. This design eliminates roller gap and belt pinch and subsequent belt damage. 偏置托辊组是一种中心辊偏置的设计,这种设计消除了托辊间的缝隙和皮带之间的夹角对皮带造成的损坏。
View details

Self Aligning Trough Roller

When the position of belt is changed from its center line on the same plane,the self-aligning roller can correct this condition.There are three types of self-aligning idler:blocking roller、friction roller and taper self-aligning roller.They are used both carrier and return section.
View details

Self Aligning Return Roller

When the position of belt is changed from its center line on the same plane,the self-aligning roller can correct this condition.There are three types of self-aligning idler:blocking roller、friction roller and taper self-aligning roller.They are used both carrier and return section.
View details

Self Aligning Friction Roller

When the position of belt is changed from its center line on the same plane,the self-aligning roller can correct this condition.There are three types of self-aligning idler:blocking roller、friction roller and taper self-aligning roller.They are used both carrier and return section.
View details

Self Aligning Return Friction

When the position of belt is changed from its center line on the same plane,the self-aligning roller can correct this condition.There are three types of self-aligning idler:blocking roller、friction roller and taper self-aligning roller.They are used both carrier and return section.
View details

Self Aligning Cone Roller

When the position of belt is changed from its center line on the same plane,the self-aligning roller can correct this condition.There are three types of self-aligning idler:blocking roller、friction roller and taper self-aligning roller.They are used both carrier and return section.
View details

Self Aligning Cone Return Roller

When the position of belt is changed from its center line on the same plane,the self-aligning roller can correct this condition.There are three types of self-aligning idler:blocking roller、friction roller and taper self-aligning roller.They are used both carrier and return section.
View details

Wing Roller

Wing rollers are replacement parts common to European-designed track mounted crushers and other small processing equipment. Customers are able to replace separate segments of the roller set including the rollers and center stands. 翼型托辊是欧洲设计的履带式破碎机和其他小型加工设备通用的替换零件。客户可以更换托辊组的单独部分,包括托辊和中心支架。
View details

Garland Roller

Garland roller comprises either 3-roller or 5-roller joined together at the ends of their respective shafts by special lugs, to form a continuous 'chain' of roller. On either end of this 'chain', the shafts are connected to an attachment bracket which enables the roller set to be attached to the conveyor stringer structures. 串辊由三节托辊或五节托辊组成,并通过连接片把各个托辊轴的端部连接在一起,形成一个连续的“链条”。
View details
Page up
1
2
3